YATO transformer soldering iron with accessories 200W
Produkt-Barcode: 1599788937848
Registrieren Sie sich und sehen Sie die Preise
Prekės pristatymas: 20 - 30 d.d.
The special design allows working in three temperature ranges:
A: 70-200 °C
B: 201-350 °C
C: 351-500 °C
It is worth adjusting the temperature range depending on the work being done, such as soldering wires (B or C), main electronic components on the PCB (B), cutting lines or cords of plastic (A or B), etc.
The tips of YATO transformer soldering irons are coated with a material that reduces the oxidation of the tip. Senseless overheating and mechanical damage quickly destroy the protective layer, then the tip oxidizes, which leads to problems with the melting of the solder. Instead of the tin melting and sticking to the tip, it rolls and falls off.
A proven way to care for a tip is to tin it. When heating the soldering iron for the first time, put some tin on the tip and remove the excess with something like brass filings. The layer of tin thus formed protects against oxidation. It is good practice to tin the nozzle after each job is finished.
Transformer soldering irons, due to their relatively small dimensions, depend on the production technology of an intermittent transformer. In order to maintain the highest operating parameters of the device, the following principle must be followed:
12s soldering
48 seconds
Exceeding the soldering time once, following the tip care rules, will not adversely affect the further performance of the soldering iron, especially if we let the device cool down. In an overheated transformer, its efficiency decreases, and thus the ability to heat the nozzle to the required temperature. Overheating the transformer also increases the risk of damaging it. A traditional transformer for continuous operation of such a high power should weigh several kilograms, and its dimensions would resemble a small welder, rather than a convenient soldering iron in the shape of a gun.
Features:
- 200W soldering iron
- three interchangeable tips with a diameter of 3.35 mm at the mounting point
- rosin
- tin
- the key
- a suitcase
- Mains voltage [V ~]: 230-240
- Mains frequency [Hz]: 50
- Nominal power [W]: 200
- A / B / C tip temperature [deg. C]: 70 – 200/201 – 350/351 – 500
- Type of work S2 20%: 12s / 48s
- Dimensions (L x W x H) [mm]: 185 x 185 x 55
- Weight [kg]: 0.92
- Insulation electrical protection class: II
-
Wir garantieren, die Ware zu den niedrigsten Preisen zu liefern.
-
Wir bieten Ihnen eine sehr bequeme Drop-Shipping-Option!
-
Wir bieten Ihnen mehr als 650 Artikel von 240 Lieferanten!
The special design allows working in three temperature ranges:
A: 70-200 °C
B: 201-350 °C
C: 351-500 °C
It is worth adjusting the temperature range depending on the work being done, such as soldering wires (B or C), main electronic components on the PCB (B), cutting lines or cords of plastic (A or B), etc.
The tips of YATO transformer soldering irons are coated with a material that reduces the oxidation of the tip. Senseless overheating and mechanical damage quickly destroy the protective layer, then the tip oxidizes, which leads to problems with the melting of the solder. Instead of the tin melting and sticking to the tip, it rolls and falls off.
A proven way to care for a tip is to tin it. When heating the soldering iron for the first time, put some tin on the tip and remove the excess with something like brass filings. The layer of tin thus formed protects against oxidation. It is good practice to tin the nozzle after each job is finished.
Transformer soldering irons, due to their relatively small dimensions, depend on the production technology of an intermittent transformer. In order to maintain the highest operating parameters of the device, the following principle must be followed:
12s soldering
48 seconds
Exceeding the soldering time once, following the tip care rules, will not adversely affect the further performance of the soldering iron, especially if we let the device cool down. In an overheated transformer, its efficiency decreases, and thus the ability to heat the nozzle to the required temperature. Overheating the transformer also increases the risk of damaging it. A traditional transformer for continuous operation of such a high power should weigh several kilograms, and its dimensions would resemble a small welder, rather than a convenient soldering iron in the shape of a gun.
Features:
- 200W soldering iron
- three interchangeable tips with a diameter of 3.35 mm at the mounting point
- rosin
- tin
- the key
- a suitcase
- Mains voltage [V ~]: 230-240
- Mains frequency [Hz]: 50
- Nominal power [W]: 200
- A / B / C tip temperature [deg. C]: 70 – 200/201 – 350/351 – 500
- Type of work S2 20%: 12s / 48s
- Dimensions (L x W x H) [mm]: 185 x 185 x 55
- Weight [kg]: 0.92
- Insulation electrical protection class: II
Versandinformationen
17 andere Artikel in der gleichen Kategorie:
YATO 3/8" wrench set 22 pcs.
Laikinai neturime
Unterstellböcke 2 Stk.
Laikinai neturime
Combination spanner set 1/2" 1/4" 3/8" 216 pcs. YT-38841 YATO
Wir haben das Produkt auf Lager
Werkzeugsatz mit Koffer (104-tlg.)
Laikinai neturime
Schweißkabel WIG LIFT-Brenner
Laikinai neturime
Starter cables 400A 2x2.5m YATO
Laikinai neturime
Tool set, wrenches, torx bits, 108 pcs. MASTIFF
Laikinai neturime
Set of socket wrenches 108 pcs. CHROME VANADIUM MAR-POL
Laikinai neturime
Abbruchhammer, 3200w
Laikinai neturime
Elektrinė vabzdžių gaudyklė uodams, musėms, vapsvoms
Laikinai neturime
Bohrer-Satz mit Etui, 246-tlg.
Laikinai neturime
Wrench set 94 el. MAR-POL
Laikinai neturime
Vairuotojo pavarų dėžės raktelis
Laikinai neturime
Schweißmaschine 330A IGBT PM-IMGT-330S
Laikinai neturime
Schweißmaschine 330A IGBT PM-IMGT-330S
Laikinai neturime